счетчик посещений

Текущий список публикации г.н.с. Шишковского И. В.

(курсивом отмечены опубликованные в трудах конференций доклады, которые были заявлены, но не представлены по тем или иным малозависящим от авторов причинам)

Ниже представлен регулярно обновляемый полный список публикаций только за последние года. Со списком всех реферируемых журнальных публикаций можно ознакомиться на сайте СФ ФИАН.

2022 год (Skoltech, CMT)

  1. Makarenko K., Dubinin O., Shishkovsky I. Direct Energy Deposition of Cu-Fe System Functionally Graded Materials: Miscibility Aspects, Cracking Sources, and Methods of Assisted Manufacturing, p XXXX. Book Chapter XX in InTech Publ., Igor V. Shishkovsky (Ed.) 'Advanced Additive Manufacturing', 2022, London, UK. ISBN: XXXXXXX, Print ISBN: XXXXXX, XXX p. Open access
  2. Chugunov S., Smirnov A., Kholodkova A., Tikhonov A., Dubinin O., Shishkovsky I. Evaluation of Stereolithography-Based Additive Manufacturing Technology for BaTiO3 Ceramics at 465 nm.// Applied Sciences, 2022, 12, 412. Open Access
  3. M. Isachenkov, S. Chugunov, Z. Landsman, I. Akhatov, A. Metke, A. Tikhonov, I. Shishkovsky. Characterization of novel lunar highland and mare simulants for ISRU research applications. // Icarus, 2022, 114873. Doi: 10.1016/j.icarus.2021.114873
  4. Khaimovich A., Erisov Y., Shishkovsky I. Thermodynamic Conditions for Consolidation of Dissimilar Materials in Bimetal and Functional Graded Structures. // Materials, 2022, 15(3), 825. Open Access
  5. Smirnov A., Chugunov S., Kholodkova A., Isachenkov M., Tikhonov A., Dubinin O., Shishkovsky I. The fabrication and characterization of BaTiO3 piezoceramics using SLA 3D printing at 465 nm wavelength. // Materials, 2022, 15 (3), 960. Open Access

2021 год. (Skoltech, CDMM)

  1. A. Smirnov, S. Chugunov, A. Kholodkova, M. Isachenkov, A. Vasin, I. Shishkovsky. Progress and challenges of 3D-printing technologies in the manufacturing of piezoceramics. // Ceramics International, 2021, 47(8), p. 10478–10511. Doi: 10.1016/j.ceramint.2020.12.243
  2. Volgin O., Shishkovsky I. Material Modelling of FDM printed PLA part. // Engineering Solid Mechanics, 2021, 9(2), p. 153–160. Open access
  3. Isachenkov M., Chugunov S., Akhatov I., Shishkovsky I. Regolith-based Additive Manufacturing for Sustainable Development of Lunar Infrastructure – an Overview. // Acta Astronautica, Vol. 180, March 2021, p. 650-678. Doi: 10.1016/j.actaastro.2021.01.005
  4. S. Chernyshikhin, I. Shishkovsky. Single Track Formation Analysis in Selective Laser Melting of NiTi Powder (oral). // 11th International Conference on Key Engineering Materials (ICKEM 2021), Skoltech, Moscow, Russia, March 26-29.
  5. Shishkovsky I.V., Scherbakov V.I. Additive manufacturing of polymer composites with nano- titania inclusion. // Laser Physics Letters, 2021, 18 066001. doi: 10.1088/1612-202X/abf83b
  6. Шишковский И.В. Генеративные модели машинного обучения для анализа взаимосвязей свойств и параметров процесса в 3D-печати (Онлайн - устный доклад) //XXII Харитоновские Тематические Научные Чтения «Суперкомпьютерное Моделирование и Искусственный Интеллект» 19-23 апреля 2021 г, ВНИИЭФ, Саров, РФ.
  7. S. Chugunov, A. Smirnov, A. Kholodkova, A. Tikhonov, O.Dubinin, I. Shishkovsky. UV-curing parameters optimization for SLA-based piezoceramics. (Online - oral) // 2021 Spring Meeting of the European Materials Research Society (E-MRS), Symposium H “Laser material processing: from fundamental interactions to innovative applications”, May 31st to June 3rd, 2021.
  8. Chernyshikhin S., Shishkovsky I. Melt pool characterization and numerical simulation in selective laser melting of NiTi powder (Online - oral report) / Ibidem.
  9. Makarenko K., Dubinin O., Shishkovsky I. Dendritic Structure Characteristics of the Cu-based Laser Deposited Functionally Graded Materials. (Online - oral) // AeroMat 2021, Section: Additive Manufacturing III-a, May 24 - 26, 2021, Quebec City, Canada.
  10. Шишковский И.В. Стратегии дизайна для аддитивного производства (пленарный доклад) // Международная научно-техническая конференция «Проблемы и перспективы развития двигателестроения», 23–25 июня 2021, Самара, РФ.
  11. S. Chernyshikhin, I. Shishkovsky. Melt pool characterization and numerical simulation in selective laser melting of NiTi powder (oral) // Ibidem.
  12. Y. Kuzminova, A. Shibalova, S. Evlashin, I. Shishkovsky, P. Krakhmalev. Structural effect of low Al content in the in-situ additive manufactured CrFeCoNiAlx high-entropy alloy. // Materials Letters, Vol. 303, 15 November 2021, 130487. doi :10.1016/j.matlet.2021.130487
  13. S. Chernyshikhin, D. Firsov, I. Shishkovsky. Study on the resolution factors of Laser Powder Bed Fusion (oral) // The 10th International conference on Beam Technologies and Laser Application from September 20 – 22, 2021, Saint-Petersburg, Russia.
  14. Panov D., Shishkovsky I. Effect of laser polishing on the surface properties of parts manufactured by SLM (poster) // Ibidem.
  15. Кузнецов М., Шишковский И. Комбинированная технология СВС-СЛС для получения функциональных имплантатов (устный доклад) // Международная научная конференция «Фундаментальные и прикладные науки - медицине» НАН Беларуси и Институт Физиологии НАН Беларуси, октябрь 2021.
  16. А.Н. Быков, А.В. Дуб, В.В. Попов, М.Д. Кривилев, Б.В. Потапкин, И.В. Цивильский, К.Ю. Храмов, А.А. Книжник, И.В. Шишковский. Виртуальный 3D-принтер – основа отечественного комплексного программного обеспечения моделирования многомасштабных процессов аддитивного производства в рамках реализации Стратегии развития АТ РФ (ключевой доклад) //VII Международная конференция «Аддитивные технологии: настоящее и будущее» 07- 08 октября 2021, ФГУП «ВИАМ» ГНЦ РФ, Москва.
  17. Shishkovsky I., Dubinin O., Konev S.Topological design of 3D composite scaffolds and their mechanical features (Online - oral) // ProDPM'21 - International Conference on Progress in Digital and Physical Manufacturing, Leira, Portugal, 27-29 October 2021.
  18. S. Chernyshikhin, I. Shishkovsky. Melt Pool Characterization and Numerical Simulation in Selective Laser Melting of NiTi Powder (Online - poster) // MS&T21 Materials Science & Technology. Technical Meeting and Exhibition. Symposium: Additive Manufacturing: Processing, Microstructure and Material Properties of Titanium-based Materials — Session IV. October 17-20, Columbus, Ohio, USA.
  19. K.I. Makarenko, O.N. Dubinin, I.V. Shishkovsky. Physical and Mechanical Properties of Aluminium Bronze - Stainless Steel Binary Alloy after Laser Metal Deposition (Online - oral) // MS&T21 Materials Science & Technology. Technical Meeting and Exhibition. USA. Symposium: Additive Manufacturing of Metals: Microstructure, Properties and Alloy Development — Session: Ti-/Co-/Cr-/Cu-based Alloys. October 17-20, Columbus, Ohio, USA.
  20. D. Panov, O. Oreshkin, I. Shishkovsky. Effects of Laser Polishing Parameters on Surface Roughness of Additively Manufactured Stainless Steel 316L Parts (Online - poster) // MS&T21 Materials Science & Technology. Technical Meeting and Exhibition. Symposium Section: On-Demand Oral Presentations.
  21. M. Isachenkov, O. Dubinin, S. Chugunov, I. Akhatov, I. Shishkovsky. Additive manufacturing of complex shape ceramic parts from lunar regolith simulant (oral report) // IAC-2021 proceedings, paper number 67162, https://dl.iafastro.directory/event/IAC-2021/paper/67162/
  22. K.I. Makarenko, O.N. Dubinin, I.V. Shishkovsky. Induced Magnetic Response of Binary Aluminum Bronze – Stainless Steel Laser Deposited Alloy (Online - oral report) // International Conference on Additive Manufacturing , November 1-5, 2021 , JW Marriott - Anaheim, CA, USA | Virtual.
  23. K. Makarenko, O. Dubinin, S. Konev, I. Shishkovsky. Physical and Mechanical Properties of Cu-Fe System Functionally Graded and Multimaterial Structures after the DED. // ArXiv preprint (30 Sep 2021). Open access
  24. A. Khaimovich, Y. Erisov, A. Agapovichev, I. Shishkovsky, V. Smelov, V. Razhivin. Practical Approbation of Thermodynamic Criteria for the Consolidation of Bimetallic and Functionally Gradient Materials. // Metals, 2021, 11(12), 1960. Open Access.
  25. S Chernyshikhin , D. Firsov, I. Shishkovsky. Selective laser melting of pre-alloyed NiTi powder: Single tracks study and FE modeling with heat source calibration. // Materials, 2021, 14(23), 7486. Open Access.

2020 год. (Skoltech, CDMM)

  1. Shishkovsky I., Scherbakof V. Influence of laser cycling on electro-structural features of nickel-titanium SMA fabricated by LPBF process. // Applied Surface Science, 2020, V. 508, 145278. doi: 10.1016/j.apsusc.2020.145278
  2. Shishkovsky I., Scherbakov V., Kuznetsov M., Belousova O., Morozov Y. 4D Laser Printing of Functionally Graded Structures and Items from Mixtures of Powdered Polymers with Functional Micro- and Nanoparticles: An Autoreview. // International Journal of Self-Propagating High-Temperature Synthesis, 2020, Vol. 29, No. 2, pp. 77–86. doi:10.3103/S1061386220020132
  3. Д. Фирсов, С. Конев, О.Дубинин, С. Евлашин, И. Шишковский. Локализация деформации в решетчатых структурах 3D печатных образцов стали 03Х17Н14М2. // ПЖТФ, 2020, T. 46, N 14, c. 9-12. doi: 10.21883/PJTF.2020.14.49658.18329
  4. K. Mohammadi, M. Movahhedy, I. Shishkovsky, R. Hedayati. Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique. // Applied Physics Letters, 117, 000000 (2020); doi: 10.1063/5.0014167 // ArXiv preprint (17 May 2020). Open access
  5. Makarenko K., Dubinin O., Shornikov P., Shishkovsky I. Specific aspects of the transitional layer forming in the aluminium bronze - stainless steel functionally graded structures after laser metal deposition. // 11th CIRP Conference on Photonic Technologies LANE 2020 , September 06-10, 2020 , Furth, Germany. // Procedia CIRP, 2020, 94: 346-351. Open access
  6. Shishkovsky I., Kakovkina N., Scherbakof V. Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating. // Ibidem. // Procedia CIRP, 2020, 94: 217-221. Open access
  7. Volgin O., Shishkovsky I. Material Modelling of FDM printed PLA parts. // 23rd International Conference on Composite Structures & 6th International Conference on Mechanics of Composites, FEUP, Porto, Portugal 1-4th September, 2020.
  8. Shishkovsky I., Scherbakov W. Influence of additional heating during laser PBF on mechanical properties the Ni-Al intermetallic composites. // Ibidem.
  9. Makarenko K., Shishkovsky I. Direct Energy Deposition of Cu-Fe System Functionally Graded Structures. // Inter. Russian Conf. on Materials Science and Metallurgical Technology (RusMetalCon-2020), Chelyabinsk, Russia, September 22-24, 2020. // IOP Conference Series: Materials Science and Engineering (MSE), 969 (1), 012104. Doi:10.1088/1757-899X/969/1/012104
  10. Смирнов А.В., Чугунов С.С., Тихонов А.А., Дубинин О.Н., Холодкова А.А., Шишковский И.В., Исаченков М.В. Разработка и исследование методов аддитивного производства керамики BaTiO3 с использованием процессов лазерной стереолитографии. // В сборнике: Перспективные технологии и материалы. Материалы научно–практической конференции с международным участием. Севастополь, 14-16 октября 2020, с. 182-185.
  11. Смирнов А.В., Чугунов С.С., Тихонов А.А., Дубинин О.Н., Холодкова А.Н., Шишковский И.В. Разработка и исследование методов аддитивного производства керамики Ba-TiO3 с использованием процессов лазерной стереолитографии. // Материалы VII Международной молодежной научно-практической конференции 'Актуальные вопросы современного материаловедения', Уфа, 29-30 октября 2020 г., с. 122-128.
  12. Холодкова А.Н., Смирнов А.В., Васин А.А., Чугунов С.С., Шишковский И.В. Особенности синтеза титаната бария для аддитивного производства бессвинцовой пьезокерамики. // Шестой междисциплинарный научный форум с международным участием «Новые материалы и перспективные технологии», Москва, 23-27 ноября, 2020, с. 606-609.
  13. Makarenko K., Dubinin O., Shishkovsky I. Analytical Evaluation of the Dendritic Structure Parameters and Crystallization Rate of the Laser Deposited Fe-Cu Functionally Graded Materials. // Materials, 2020, 13, 5665. Open access

2019 год. (Skoltech, CDMM)

  1. Shishkovsky I., Kakovkina N., Scherbakoff W. Layerwise fabrication refractory NiCrSiB composite with gradient grow of tungsten carbide additives by selective laser melting. // Optics and Laser Technology, 2019, V. 120, 105723. doi: 10.1016/j.optlastec.2019.105723
  2. Shishkovsky I., Scherbakof W. Nickel titanium intermetallic SMA after SLM with annealing: electro-structural features. (poster) // MECHCOMP 2019, 5th international Conference on mechanics of Composites. Lisbon, Portugal, 1-4 July 2019, p. 5.
  3. Shishkovsky I., Kakovkina N., Scherbakof W. Influence of additional heating during layerwise laser melting on strength properties of NiCr composite. (oral) // Ibidem, p. 26.
  4. Shishkovsky I., Scherbakov V. Additive manufacturing of polymer composites with nano -titania inclusions for green energy tasks. (oral) // E-MRS Spring Meeting 2019. Symposium P: Dielectric nanocomposites for energy, environment and health: from fundamental to devices. May 27-31, Nice, France. 2019, p. P-16.
  5. Shishkovsky I., Scherbakof V. Influence of laser cycling on electro-structural features of nitinol SMA fabricated by hybrid LPBF process with annealing. (oral) // E-MRS Spring Meeting 2019. Symposium V: Laser interactions with materials: from fundamentals to applications. May 27-31, Nice, France. 2019, p. V-15.
  6. Shishkovsky I. Aerospace applications of the SLM process of functional and functional graded metal-matrix composites based on NiCr superalloys. Pages 265-280. Book Chapter 12 in Elsevier Publ., F. Froes, R. Boyer (Eds.) 'Additive Manufacturing for the Aerospace Industry. 1st Edition', 2019. ISBN: 978-0-12814-062-8, 482 p.

 


::СФ ФИАН версия 6.0 --> ::design by © Игорь В. Шишковский, 2022